Neff T69S86N0 Instrukcja Użytkownika Strona 1

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Płyty grzewcze Neff T69S86N0. Neff T69S86N0 User Manual Instrukcja obsługi

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 13
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 0
USER INSTRUCTIONS
INSTALLATION
INSTRUCTIONS
MAINTENANCE
INSTRUCTIONS
This cooktop is for use with
Natural Gas and Propane
Gas
T69S86N0AU
GMK10010
AS 4551:2008
Leave these instructions with the owner
Przeglądanie stron 0
1 2 3 4 5 6 ... 12 13

Podsumowanie treści

Strona 1 - AS 4551:2008

USER INSTRUCTIONSINSTALLATION INSTRUCTIONSMAINTENANCE INSTRUCTIONSThis cooktop is for use with Natural Gas and Propane GasT69S86N0AUGMK10010AS 4551:20

Strona 2

10Cooking pansSuitable pansThe chart below gives the correct pan usage for each burner.Precautions for useThe following advice is intended to help you

Strona 3 - Ú Table of contents

11ServiceSometimes certain faults detected can be easily resolved. Before calling the Technical Assistance Service, bear in mind the following advice:

Strona 4 - Installation

12Wiring diagramA SwitchB Blue wireC Brown wireD TerminalE Ignition module

Strona 5 - Connection

B*9000799162*9000799162Constructa Neff Vertriebs-GmbHCarl-Wery-Straße 34D-81739 MünchenN29210

Strona 6 - Propane Gas

2Date installed: ...Installed by: ...

Strona 7 - Adjustment of the taps

3Ú Table of contentsSafety considerations ...3For your safety...

Strona 8 - Operating instructions

4This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience a

Strona 9 - LJQLWLRQ

5ClearancesA range hood fitted above the top must be installed according to the installation instructions for the range hood. A minimum distance of 65

Strona 10 - ≥220 mm ≥220 mm

6For position of the inlet connection refer Preparing to install.Use pipe compound or thread sealant, properly threaded pipes and careful assembly pro

Strona 11

7Changing the outer flame nozzle1. Loosen the clamp screw to release the bushing by moving it backwards to access the main nozzle easily. Fig. a1.2. R

Strona 12 - Wiring diagram

8Operating instructionsBurner locations1 Pan supports2 Control knobs3 Auxiliary burner (up to 1.1 kW)4 Semi-rapid burner (up to 1.9 kW)5 Rapid burner

Strona 13 - *9000799162*

9Safety systemDepending on the model, your hob may have a safety system (thermocouple) that prevents the flow of gas if the burners accidentally switc

Komentarze do niniejszej Instrukcji

Brak uwag